On 02/08/2011 9:57 PM, wawan_wiratno wrote:
> cf only have one partition, ext2 linux 0x83 bootable
> if I use kernel from flash with cf root fs, it boot perfectly.
> here is the command:
> fis load vmlinux
> exec -c "console=ttyAM0,115200 root=/dev/hda1"
>
> but when I switch the kernel to load from cf I got this:
> load -b 0x00218000 -m disk hda1:/boot/vmlinux
> exec -c "console=ttyAM0,115200 root=/dev/hda1"
> e2fs_open: e2fs_inode_lookup failed
> Can't load 'hda1:/boot/vmlinux': Can't open file
>
> some thread in this forum said that above command works, but not for me.
>
> do I miss something?
Sounds like the kernel isn't on the CF card at /boot/vmlinux, you can't
just copy'n'paste lines from other peoples setup, check where you stored
the kernel on the CF card and adjust the load line accordingly.
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|