|
From: Jim Jackson <> To: Sent: Tuesday, August 2, 2011 12:31 PM Subject: Re: [ts-7000] Sleep mode on ts-7200 On Tue, 2 Aug 2011, Marcos wrote: > I need to put my 7200 to sleep but not sure how to do it. I am aware > about not irq can be used in userspace with this board so need to poll a > digital int in order to wake it up. Timing is not critical in my app. As far as I know the ts7200 doesn't have a "sleep" mode. You can control various things to reduce the power consumption, turning the ethernet phy off, reducing the various clock frequencies, etc but that only gives a low compute power, lower electrical power state. If I remember correct I managed to get power down to about 0.75 watts, with the ethernet phy powered off and running with a CPU clock of about 40MHz. I suspect when you say "sleep mode" you mean an even lower power state. __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |