[ts-7000] Re: TS-UART or XUART (RTS/CTS)

["lahmitiasas" <>]

I guess the only solution is to choose 2 DIO pins and handle them like RTS/CTS. 

--- In  "naturalwatt" <> wrote:
>
> 
> 
> --- In  "lahmitiasas" <lahmitiasas@> wrote:
> >
> > Hi ,
> > 
> > I have a question concerning the TS-UART and XUART(ts-sockets) hardware 
> > flow control.
> > Does those peripherals handle RTS/CTS signals ?
> > Because i saw that those peripherals have only RX and TX pins.
> > 
> > Thanks in advance
> >
> 
> I strongly suspect you have answered your own questions. Since the XUART port 
> don't have RTS/CTS pins they don't handle hardware flow control.  Someone may 
> of course correct me ...
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/