ts-7000
[Top] [All Lists]

[ts-7000] Re: Panel Touch Screen : TS-TPC-8390 (TS4800) cannot connect t

To:
Subject: [ts-7000] Re: Panel Touch Screen : TS-TPC-8390 (TS4800) cannot connect to network.
From: "iPAS" <>
Date: Fri, 03 Jun 2011 13:46:10 -0000
Thank you for your kind. 

I found out that after first boot on SD card, 
'initrd' partition was the system where I belonged.
But after exit from initrd, then, TS4800 boot into Linux root file system on SD 
card.
Network could be accessed by TS4800 that this time.

ps.
DHCP on boot: vi /etc/network/interface
or 
dhclient eth0

--- In  "Doug" <> wrote:
>
> I have the exact same problem. Technologic is aware of the problem--in fact 
> they were already aware of it when I reported it to them a few weeks ago. 
> They said they will have a new image up when they have a fix.
> 
> In the meantime, the ethernet actually works sometimes and sometimes doesn't 
> work. If you keep rebooting you may be able to get it to work every now and 
> then (I know that sucks, but it's better than nothing...) Once it's working 
> during a boot, it stays working as long as it continues to be powered up in 
> my experience.
> 
> --- In  "iPAS" <pasakorn_t@> wrote:
> >
> > I did as suggestion on
> > http://tech.groups.yahoo.com/group/ts-7000/message/20627
> > as a result that TS4800 could boot via SD card.
> > 
> > The latest image for SD card is
> > ftp://ftp.embeddedarm.com/ts-socket-macrocontrollers/ts-4800-linux/binar\
> > ies/ts-images/2gbsd-may052011-interim-squeeze.dd.gz .
> > 
> > But the above mentioned image do not support network connection via
> > Ethernet port.
> > This problem still could not be solved.
> > Do you have any idea ?
> > 
> > ps.
> > # dmesg
> > ..
> > ..
> > eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=0:00,
> > irq=-1)
> > mxc_ipu mxc_ipu: Channel already disabled 9
> > mxc_ipu mxc_ipu: Channel already uninitialized 9
> > #_
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU