[ts-7000] TS7800: 2.6.34 + sarge?

[Simon Leung <>]

Hi,

I've trying a strange combination without success.  As the subject 
suggests: I'm trying to boot an SD card with 2.6.34 with sarge root fs. 
So here is what I did:

I have a SD card with the latest 512mb-latest.dd.
I built 2.6.34 zImage and 'dd if=zImage of=/dev/sdb2' on to the SD card.
However, the SD doesn't boot.  System says "Uncompressing Linux... done, 
booting the kernel." and hang.

The same kernel boots fine with a 2.6.34 SD image.

Thanks for any help.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/