Hi, I just joined this group after talking to Jose from Tech. Systems, Inc
about my plan of using the TS-5400 in our RTOS lab. My interest is to move our
QNX targets to a smaller foot print such as this SBC because we have 4 of these
boards in the inventory. Anybody familiar with this problem? I am trying to use
f32fdisk, f32fmt and the tinyx86.ifs image, but don't know how to make it boot
in the SBC CF socket. Tried a 4GB and don't know if the board can mount this
much capacity. On the other hand, I couldn't load the timyx89 into a 248MB CF
either, which had DOS and Linux partitions and apparently came with the kit.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|