|
Thanks Daniel for your help and thank everyone who helped me. Finally, I load the kernel (tskernel-2.6.21-ts) via tftp, following
the steps in this link: http://www.simiolabs.com/developer/wiki/index.php?title=Compiling_and_running_kernel_2.6 The version 2.6 of Kernel works fine from a USB stick. Unfortunately, I could not update or install some programs using the "apt-get" command . But this issue I will discuss in another topic. Thanks!!! Cheers ... Ricardo De: Ricardo Gabriel <> Para: "" <> Enviado: miércoles, 11 de mayo de 2011 15:32 Asunto: Re: [ts-7000] Re: How to load kernel 2.6 on USB stick for TS7260? Finally, I load the kernel (tskernel-2.6.21-ts) via tftp. The problem was in the config file, after of execute the command: make menuconfig. Because, the menuconfig wasn't saving correctly the config file. But I have another problem now. I can't update the version of gcc compiler. The kernel has the version 3.3.5 of gcc. I need the version 4.3 of gcc compiler When I run the command: apt-get install gcc, the screen show me the following message: Reading package lists... Done Building dependency tree... Done gcc-3.3.5 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. How I can upgrade to 4.3 version? Regards, Ricardo De: Daniel <> Para: Enviado: jueves, 28 de abril de 2011 11:58 Asunto: [ts-7000] Re: How to load kernel 2.6 on USB stick for TS7260? Hello, have you set up your USB filesystem correctly? Remember that this will only work if you have a USB drive with a working filesystem attached to the SBC. Maybe you can try and allow more time for the process to find the filesystem, change:
console=ttyAM0,115200 root=/dev/sda1 rootdelay=5 to console=ttyAM0,115200 root=/dev/sda1 rootdelay=10 Let me know how that goes. Daniel. --- In , Ricardo Gabriel <> wrote: > > I > try to load the kernel > through tftp, as shown > here: > > http://www.simiolabs.com/developer/wiki/index.php?title=Compiling_and_running_kernel_2.6 > > But, the screen shows > me the following error > message: > > Kernel panic: VFS: Unable to mount root fs > > the board > gets the message and not > progressing in the boot. > > What can > be happening? > > Saludos ... > > Ricardo > __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |