|
Daniel, I couldn't upgrade gcc. I changed my /etc/apt/source.list to: deb http://archive.debian.org/debian etch main It worked, but I had a problem when the program tried to install. The screen show me that: dpkg: `install-info' not found on PATH. dpkg: 1 expected program(s) not found on PATH. NB: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) And the version of gcc can not be updated. Any idea about this? Regards, Ricardo De: Daniel <> Para: Enviado: viernes, 13 de mayo de 2011 15:08 Asunto: [ts-7000] Re: How to load kernel 2.6 on USB stick for TS7260? --- In , Ricardo Gabriel <> wrote: > > Finally, I load the kernel (tskernel-2.6.21-ts) via tftp. > > The problem was in the config file, after of execute the command: make menuconfig. > Because, the menuconfig wasn't saving correctly the config file. > > > But I have another problem now. I can't update the version of gcc compiler. The kernel has the version 3.3.5 of gcc. I need the version 4.3 of gcc compiler > > When I run the command: apt-get install gcc, the screen show me the following message: > > Reading package lists... Done > Building dependency tree... Done > gcc-3.3.5 is already the newest version. > 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. > > How I can upgrade to 4.3 version? > > Regards, > > Ricardo > > > > ________________________________ > De: Daniel <> > Para: > Enviado: jueves, 28 de abril de 2011 11:58 > Asunto: [ts-7000] Re: How to load kernel 2.6 on USB stick for TS7260? > > > Â > Hello, have you set up your USB filesystem correctly? Remember that this will only work if you have a USB drive with a working filesystem attached to the SBC. Maybe you can try and allow more time for the process to find the filesystem, change: > > console=ttyAM0,115200 root=/dev/sda1 rootdelay=5 > > to > > console=ttyAM0,115200 root=/dev/sda1 rootdelay=10 > > Let me know how that goes. > > Daniel. > > --- In , Ricardo Gabriel <ricardogabriel5@> wrote: > > > > I > > try to load the kernel > > through tftp, as shown > > here: > > > > http://www.simiolabs.com/developer/wiki/index.php?title=Compiling_and_running_kernel_2.6 > > > > But, the screen shows > > me the following error > > message: > > > > Kernel panic: VFS: Unable to mount root fs > > > > the board > > gets the message and not > > progressing in the boot. > > > > What can > > be happening? > > > > Saludos ... > > > > Ricardo > > > I had the very same problem, what I did was a distro upgrade, changed my /etc/apt/source.list to: deb http://archive.debian.org/debian etch main then apt-get update apt-get dist-upgrade Now I'm running gcc version 4.1.2 with Etch. I don't know if this can help you... Maybe you can upgrade to 4.3 from there! Cheers, Daniel __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |