ts-7000
[Top] [All Lists]

Re: [ts-7000] TS-7260 shutdown duration

To:
Subject: Re: [ts-7000] TS-7260 shutdown duration
From: walter marvin <>
Date: Wed, 11 May 2011 18:10:22 -0700 (PDT)


 yep unmounts are nice, but as you yourself say, not absolutely required.

--- On Wed, 5/11/11, Jim Jackson <> wrote:

From: Jim Jackson <>
Subject: Re: [ts-7000] TS-7260 shutdown duration
To:
Date: Wednesday, May 11, 2011, 10:15 AM

 



On Wed, 11 May 2011, walter marvin wrote:

>
> The only real purpose for shutdown is to flush out IO to the file system
> and finishup online communications. If you write a script to do two
> syncs, the first purpose is served. You can then simply force the
> watchdog to timeout and thus cause a hardware reboot. Clearly this mode
> of operation must be supported in case for example, you get an emergency
> power outage

If you are using non-journalled file systems on CFdisk, SD or USB then your
shutdown sequence should umount the relevant filesystems to prevent an fsck
on reboot, even if you have done the revevant sync's. If any filesystem is
"busy" (i.e. a daemon with files open on it etc) then umount may be
problematic - umount -r might help. The root filesystem if e.g. ext2 on a
cfdisk, would also be needed to be remounted readonly.

>
> --- On Wed, 5/11/11, Victor d'Agostino <> wrote:
>
> From: Victor d'Agostino <>
> Subject: Re: [ts-7000] TS-7260 shutdown duration
> To:
> Date: Wednesday, May 11, 2011, 4:00 AM
>
>
>
>
>
>
>
>  
>
>
>
>
>
>
>
>
>
> You can try  #ts7260ctl -R
>
> If ts7xxxctl exists on this board.  It will perform a hardware reboot.
>
> Victor
>
> 2011/5/10 Don Tucker <>
>
> My TS-7260 takes about a minute to shut down (after a "shutdown -h now").  Can anyone recommend ways to shorten this time?  I know that I can not launch certain daemons at start-up, so I don't have to worry about them at shutdown, but I don't know which ones I can safely remove (other than, probably, apache) from the default TS image (lenny, 2.6.21-ts).
>
>
>
>
> Don
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>



__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU