Re: [ts-7000] TS-7260 shutdown duration

[walter marvin <>]

The only real purpose for shutdown is to flush out IO to the file system and finishup online communications. If you write a script to do two syncs, the first purpose is served. You can then simply force the watchdog to timeout and thus cause a hardware reboot. Clearly this mode of operation must be supported in case for example, you get an emergency power outage

--- On Wed, 5/11/11, Victor d'Agostino <> wrote:

From: Victor d'Agostino <>
Subject: Re: [ts-7000] TS-7260 shutdown duration
To:
Date: Wednesday, May 11, 2011, 4:00 AM

 

You can try  #ts7260ctl -R

If ts7xxxctl exists on this board.  It will perform a hardware reboot.

Victor

2011/5/10 Don Tucker <m("arlut.utexas.edu","dtucker");" target="_blank" href="/mc/compose?to=">>

My TS-7260 takes about a minute to shut down (after a "shutdown -h now").  Can anyone recommend ways to shorten this time?  I know that I can not launch certain daemons at start-up, so I don't have to worry about them at shutdown, but I don't know which ones I can safely remove (other than, probably, apache) from the default TS image (lenny, 2.6.21-ts).

Don

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___