Hi Scott,
Do you think there is a chance you can paste that code here? I am trying to do
exactly what you described and I feel a little stuck.
Thank you very much!
Diego
--- In Scott Zimmerman <> wrote:
>
> Hey there,
>
> I've been playing with serial ports on my TS-7390 this morning and
> discovered some stuff I thought I'd pass on to the list.
>
> First of all, I was expecting to use devices ttyS1 and ttyS2 to address
> ports com1 and com2 on the board. After running dmesg | grep tty after
> boot, I found that the serial ports are actually on devices ttyAM1 and
> ttyAM2.
>
> Secondly, even though I read posts about com1 and com2 not supporting
> hardware flow control, I had to enable flow control to get things working.
>
> At this point I'm talking to com1 on ttyAM1 with no troubles.
>
> Thought you'd like to know,
>
> ...Zz
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|