| To: | |
|---|---|
| Subject: | Re: [ts-7000] IRQs |
| From: | Kevin Cozens <> |
| Date: | Thu, 24 Mar 2011 12:34:54 -0400 |
Anish Patel wrote:
> I am trying to use the IRQ's on the PC 104 connector for generating
> interrupts.
>
> When using 6 and 7, i have 6 set for active high and rising edge, and i
> have 7 set for active low and falling edge.
Why are you setting the IRQ to be both level and edge sensitive? You would
typically use one or the other.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] TS-7500 newbie guide, silverstarmtn |
|---|---|
| Next by Date: | Re: [ts-7000] IRQs, Mika Westerberg |
| Previous by Thread: | [ts-7000] IRQs, Anish Patel |
| Next by Thread: | Re: [ts-7000] IRQs, Mika Westerberg |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU