[ts-7000] TS7800 Help with RS-485 option

To:
Subject:	[ts-7000] TS7800 Help with RS-485 option
From:	"ghughes400" <>
Date:	Wed, 23 Mar 2011 21:04:15 -0000

I am working with the TS-7800. 

I would like to use the RS-485 in full duplex mode. My code does not seem to be 
working. I can see data going out but not back in. The online manual says I 
have to set bit 15, in the fpga resister. Which I have tried and doesnt seem to 
help any.

Is there any sample code of seting up the RS-485 full duplex correctly?

Thank you
Greg



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS7800 Help with RS-485 option, ghughes400 <= RE: [ts-7000] TS7800 Help with RS-485 option, Robert Joslyn

Previous by Date:	Re: [ts-7000] ts7xxx.subr problem on TS7260, Don Tucker
Next by Date:	[ts-7000] IRQs, Anish Patel
Previous by Thread:	[ts-7000] ts7xxx.subr problem on TS7260, wgwend
Next by Thread:	RE: [ts-7000] TS7800 Help with RS-485 option, Robert Joslyn
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU