|
This is my post link: http://tech.groups.yahoo.com/group/ts-7000/message/20242 Roberto --- In "r_bergo" <> wrote: > > Hi g_martino > You have the same problem I posted yesterday on this forum! > Did you check the flow control settings? Usually without any flow control it works well.... If you enable the hardware flow control it does not work due the polarity inversion on RTS and DTR lines. This is what happens on my TS! > Roberto > > > --- In "g_martino" pierinox666@ wrote: > > > > Hello, I have a problem with the TS-7260: I can't get any response from u.s. robotics modem connected to ttyAM0. > > I tested using minicom and using echo/cat on the device file. If I connect my pc to ttyAM0, I can send and receive data as expected. > > I'm using kernel 2.6.37, and I already edited /etc/inittab to move getty to ttyAM1. > > > __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |