Hi g_martino
You have the same problem I posted yesterday on this forum!
Did you check the flow control settings? Usually without any flow control it
works well.... If you enable the hardware flow control it does not work due the
polarity inversion on RTS and DTR lines. This is what happens on my TS!
Roberto
--- In "g_martino" <> wrote:
>
> Hello, I have a problem with the TS-7260: I can't get any response from
> u.s. robotics modem connected to ttyAM0.
> I tested using minicom and using echo/cat on the device file. If I connect my
> pc to ttyAM0, I can send and receive data as expected.
> I'm using kernel 2.6.37, and I already edited /etc/inittab to move getty to
> ttyAM1.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|