Look for resize something or other. Yes, tsbootrom-update needs to run on bthe
computer. Try fetching it with wget.
Greg <> wrote:
Hi, I'm a programmer and Linux user, but this is my first time working on
either an ARM or embedded system. I didn't get the TS-9441, so I'm having to
do everything by telnetting into the card. I'm able to get to a prompt, but I'm
a little stumped at the directions for installing Linux onto the SD card.
These are the directions that I'm trying to follow:
http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php
Steps 1 & 2 are fine. No problems there.
On step 3, is there another option besides ext2resize? I don't seem to have
that utility.
Step 4, I'm assuming you just dd to the first partition on the card.
On step 5, I'm not sure where this step is supposed to take place. Is this on
the computer that I did the dd from, or on the card? I'm assuming the card,
since you're having to get the MAC address, but I'm not sure how to get the
tsbootrom-update executable onto it.
Step 6 I'm fine with once I get there.
Thanks for your help, everyone!
------------------------------------
Yahoo! Groups Links
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|