Don
These instructions imply you are running 2.6.21-ts modules with a 2.6.29
kernel.
This isn't usually possible unless you force things.
Ian T.
On 01/25/2011 12:34 PM, Don Tucker wrote:
> Ian, thank you SO MUCH for your help. I have never come across that
> step in all of my reading. I copied the modules from the rebuilt kernel
> into the initrd partition on the SD card and was able to boot to it! I
> still receive the version magic warning about ts7400, but I wasn't sure
> what driver to copy over to resolve that one. For others who may be
> having problems booting an SD card image with a rebuilt kernel, I
> followed these steps:
>
> [1] Mounted the SD card partition 3 (using TS's
> 512mbsd-7400-linux2629-lenny-eabi.dd image) to /mnt/sdinitrd
> [2] From the INSTALL_MOD_PATH directory from the "make modules_install"
> step of rebuilding the kernel,
> "cp lib/modules/2.6.21-ts/kernel/drivers/mmc/tssdcard.ko /mnt/sdinitrd"
> "cp lib/modules/2.6.21-ts/kernel/drivers/serial/tsuart1.ko /mnt/sdinitrd"
> "cp lib/modules/2.6.21-ts/kernel/drivers/serial/tsuart7300.ko
> /mnt/sdinitrd/tsuart7400.ko"
> [3] Type sync and umount partition 3 of the SD card.
> [4] Put the card into the SBC and boot!
>
> Don
>
> On 1/25/2011 11:49 AM, Ian Thompson wrote:
>> Don
>>
>> I took the tssdcard code from the 7400 series and compiled it (with
>> changes) with the 2.6.35.7 code base. Then I copied the resultant
>> tsscard.ko into the initrd partition, where linuxrc-sdroot can load it.
>> TS just released a 2.6.34 SD card image.
>>
>> Ian T.
>>
>>
>>
>> On 01/25/2011 10:01 AM, Rekcut_Nod wrote:
>>
>>> Ian, may I ask how you were able to boot the 2.6.21 SD card with the
>>> 2.6.35.7 kernel? I tried to dd a 2.6.21 kernel onto a 2.6.29 SD card,
>>> but when I boot I get:
>>>
>>> ts7400: version magic '2.6.29-ts preempt mod_unload ARMv4 ' should be
>>> '2.6.21-ts preempt mod_unload ARMv4'
>>> tssdcard: version magic '2.6.29-ts preempt mod_unload ARMv4 ' should
>>> be '2.6.21-ts preempt mod_unload ARMv4 '
>>> Finished booting in 3.14 seconds
>>> Type 'tshelp' for help
>>> / # tsuart1: version magic '2.6.29-ts preempt mod_unload ARMv4 '
>>> should be '2.6.21-ts preempt mod_unload ARMv4 '
>>> tsuart7400: version magic '2.6.29-ts preempt mod_unload ARMv4 '
>>> should be '2.6.21-ts preempt mod_unload ARMv4 '
>>>
>>> / # exit
>>> Kernel panic - not syncing: Attempted to kill init!
>>>
>>> It looks like I need to update(or downgrade) the SD card driver, but
>>> I'm not sure how to do that or where I would put it after doing so.
>>>
>>> Don
>>> --- In <ts-7000%40yahoogroups.com>,
>>> Ian Thompson<> wrote:
>>>> I am now able to boot the TS-7800 from either the micro-SD or
>>> regular SD
>>>> slot with kernel 2.6.35.7, using a modified version of Matt's
>>>> ts72xx_sdcard code from the ts72xx series.
>>>> I can have partition 4 as either EXT3 or JFS.
>>>> All this is on a 512MB card or a 2G card configured as a 512MB.
>>>> If I make partition 4 larger to fill the 2G card, then I get a crash
>>>> after the disk is mounted during the init.d loading.
>>>> I don't have this problem on the TS-7300.
>>>>
>>>> Any ideas?
>>>>
>>>> Ian T.
>>>>
>>>> This e-mail, including any attachments and response string, may
>>> contain proprietary information which is confidential and may be
>>> legally privileged. It is for the intended recipient only. If you are
>>> not the intended recipient or transmission error has misdirected this
>>> e-mail, please notify the author by return e-mail and delete this
>>> message and any attachment immediately. If you are not the intended
>>> recipient you must not use, disclose, distribute, forward, copy,
>>> print or rely on this e-mail in any way except as permitted by the
>>> author.
>> This e-mail, including any attachments and response string, may
>> contain proprietary information which is confidential and may be
>> legally privileged. It is for the intended recipient only. If you are
>> not the intended recipient or transmission error has misdirected this
>> e-mail, please notify the author by return e-mail and delete this
>> message and any attachment immediately. If you are not the intended
>> recipient you must not use, disclose, distribute, forward, copy, print
>> or rely on this e-mail in any way except as permitted by the author.
>>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
This e-mail, including any attachments and response string, may contain
proprietary information which is confidential and may be legally privileged. It
is for the intended recipient only. If you are not the intended recipient or
transmission error has misdirected this e-mail, please notify the author by
return e-mail and delete this message and any attachment immediately. If you
are not the intended recipient you must not use, disclose, distribute, forward,
copy, print or rely on this e-mail in any way except as permitted by the author.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|