Ian, may I ask how you were able to boot the 2.6.21 SD
card with the 2.6.35.7 kernel? I tried to dd a 2.6.21
kernel onto a 2.6.29 SD card, but when I boot I get:
ts7400: version magic '2.6.29-ts preempt mod_unload ARMv4
' should be '2.6.21-ts preempt mod_unload ARMv4 '
tssdcard: version magic '2.6.29-ts preempt mod_unload
ARMv4 ' should be '2.6.21-ts preempt mod_unload ARMv4 '
Finished booting in 3.14 seconds
Type 'tshelp' for help
/ # tsuart1: version magic '2.6.29-ts preempt mod_unload
ARMv4 ' should be '2.6.21-ts preempt mod_unload ARMv4 '
tsuart7400: version magic '2.6.29-ts preempt mod_unload
ARMv4 ' should be '2.6.21-ts preempt mod_unload ARMv4 '
/ # exit
Kernel panic - not syncing: Attempted to kill init!
It looks like I need to update(or downgrade) the SD card
driver, but I'm not sure how to do that or where I would
put it after doing so.
Don
--- In ,
Ian Thompson m("...","ian.thompson");"><> wrote:
>
> I am now able to boot the TS-7800 from either the
micro-SD or regular SD
> slot with kernel 2.6.35.7, using a modified version
of Matt's
> ts72xx_sdcard code from the ts72xx series.
> I can have partition 4 as either EXT3 or JFS.
> All this is on a 512MB card or a 2G card configured
as a 512MB.
> If I make partition 4 larger to fill the 2G card,
then I get a crash
> after the disk is mounted during the init.d loading.
> I don't have this problem on the TS-7300.
>
> Any ideas?
>
> Ian T.
>
> This e-mail, including any attachments and response
string, may contain proprietary information which is
confidential and may be legally privileged. It is for the
intended recipient only. If you are not the intended
recipient or transmission error has misdirected this
e-mail, please notify the author by return e-mail and
delete this message and any attachment immediately. If you
are not the intended recipient you must not use, disclose,
distribute, forward, copy, print or rely on this e-mail in
any way except as permitted by the author.
>