[ts-7000] Permission Denied

To:
Subject:	[ts-7000] Permission Denied
From:	"Josue" <>
Date:	Fri, 21 Jan 2011 18:48:44 -0000

Hi I am compiling the kernel 2.4.26 , but when I do bzcat sdimage-new.dd.bz2 | 
dd of = / dev/sdc1 taken from this page 
http://www.embeddedarm.com/about/resource.php?item = 485 tells me permission 
denied. Any ideas. Anyone have a guide to compile the 
tskernel-2.6.21-ts-src.tar.gz



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Permission Denied, Josue <= RE: [ts-7000] Permission Denied, Russell N. Nelson - rnnelson [ts-7000] Re: Permission Denied, Josue

Previous by Date:	[ts-7000] iptables: can't initialize iptables table `filter': Bad file, Rekcut_Nod
Next by Date:	RE: [ts-7000] Permission Denied, Russell N. Nelson - rnnelson
Previous by Thread:	[ts-7000] iptables: can't initialize iptables table `filter': Bad file, Rekcut_Nod
Next by Thread:	RE: [ts-7000] Permission Denied, Russell N. Nelson - rnnelson
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU