[ts-7000] TS7300 and SD cards

To:
Subject:	[ts-7000] TS7300 and SD cards
From:	"bulkoboy10" <>
Date:	Mon, 17 Jan 2011 17:27:02 -0000

We've been using Sandisk 512M SD cards in our TS7300s for several years.
We have recently switched to Centon 2G SD cards as 512M cards are getting 
harder to find.
However, pulling the power on the boards with the Centons damages the SD card 
approximately 25% of the time. The SD card is completely dead. I can plug it 
into my PC and nothing happens, it is unrecognized.

Has anyone else seen anything like this?

Ian T. 



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS7300 and SD cards, bulkoboy10 <=

Previous by Date:	[ts-7000] Re: Why my micro-SD card does not get detected?, tiberiu_szm
Next by Date:	[ts-7000] Re: TS-7800 COM2 port won't transmit until program has ended, tommessum
Previous by Thread:	[ts-7000] TS-7800 COM2 port won't transmit until program has ended, tommessum
Next by Thread:	[ts-7000] kernel update ts 7200, josue.cubero
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU