Ok. I tried exactly the same kernel: downloaded it from this website, then used
dd to get it to /dev/mtdblock1.
My kernel output differences are as follows:
I have TS-78xx FPGA: magic=0x00b480, rev=0x02, you have rev=0x09
(probably does not mean anything)
But after the line "ata2: SATA max UDMA/133 irq 29", I have:
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron NAND 512MiB 3,3V
8-bit)
Creating 4 MTD partitions on "gen_nand":
0x000000000000-0x000000020000 : "mbr"
0x000000020000-0x000000420000 : "kernel"
0x000000420000-0x000000820000 : "initrd"
0x000000820000-0x000020000000 : "rootfs"
And then back to normal:
MV-643xx 10/100/1000 ethernet driver version 1.4
So, your NAND flash is not recognised... Maybe I will compile and upload a more
recent kernel with an initial ramdisk attached.
Jaan
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|