Adding a 2k block size while dumping the full 512MB image onto the SD card
didn't seem to help, but I'm wondering if that was why I wasn't able to create
my own 2G card before. Thanks for the link, I've been looking for exactly that
for a while now.
--- In Don Tucker <> wrote:
>
> Not sure if this is relevant, but the instructions here
>
> http://www.quakefinder.com/smf/index.php?topic=103.msg524#msg524
>
> under step 4 indicate that you need to use the flag "bs=2048" when
> dd'ing the image or you can run into problems.
>
> Hope this helps.
>
> Don
>
> On 12/30/2010 1:59 PM, geoffjay01 wrote:
> >
> > This may or may not be a problem, but I'm getting a bunch of messages
> > from fdisk about incorrect partition boundaries.
> >
> > As per the README on the FTP I've blanked out the SD card and done
> >
> > $ dd if=512mbsd-latest.dd of=/dev/sdd
> >
> > and when I try to list the partitions I get
> >
> > --------
> >
> > Disk /dev/sdd: 2032 MB, 2032664576 bytes
> > 63 heads, 62 sectors/track, 1016 cylinders
> > Units = cylinders of 3906 * 512 = 1999872 bytes
> > Sector size (logical/physical): 512 bytes / 512 bytes
> > I/O size (minimum/optimal): 512 bytes / 512 bytes
> > Disk identifier: 0x00000000
> >
> > Device Boot Start End Blocks Id System
> > /dev/sdd1 1 3 4096 c W95 FAT32 (LBA)
> > Partition 1 has different physical/logical beginnings (non-Linux?):
> > phys=(0, 4, 13) logical=(0, 4, 9)
> > Partition 1 has different physical/logical endings:
> > phys=(17, 2, 30) logical=(2, 10, 16)
> > Partition 1 does not end on cylinder boundary.
> > /dev/sdd2 3 4 3072 da Non-FS data
> > Partition 2 has different physical/logical beginnings (non-Linux?):
> > phys=(2, 12, 17) logical=(2, 10, 17)
> > Partition 2 has different physical/logical endings:
> > phys=(3, 49, 22) logical=(3, 46, 22)
> > Partition 2 does not end on cylinder boundary.
> > /dev/sdd3 5 6 1536 da Non-FS data
> > Partition 3 has different physical/logical beginnings (non-Linux?):
> > phys=(16, 12, 25) logical=(4, 16, 25)
> > Partition 3 has different physical/logical endings:
> > phys=(19, 13, 58) logical=(5, 2, 58)
> > Partition 3 does not end on cylinder boundary.
> > /dev/sdd4 7 254 482944 83 Linux
> > Partition 4 has different physical/logical beginnings (non-Linux?):
> > phys=(50, 7, 6) logical=(6, 22, 33)
> > Partition 4 has different physical/logical endings:
> > phys=(1023, 7, 61) logical=(253, 40, 22)
> > Partition 4 does not end on cylinder boundary.
> >
> > --------
> >
> > the SD card I'm using here shows up as 64MB larger than the one
> > supplied by TS so these warnings don't really surprise me.
> >
> > What I'm wondering is if I can safely ignore these or better yet is
> > there a way to remedy them?
> >
> > Thanks.
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|