Not sure if this is relevant, but the instructions here
http://www.quakefinder.com/smf/index.php?topic=103.msg524#msg524
under step 4 indicate that you need to use the flag "bs=2048" when
dd'ing the image or you can run into problems.
Hope this helps.
Don
On 12/30/2010 1:59 PM, geoffjay01 wrote:
>
> This may or may not be a problem, but I'm getting a bunch of messages
> from fdisk about incorrect partition boundaries.
>
> As per the README on the FTP I've blanked out the SD card and done
>
> $ dd if=512mbsd-latest.dd of=/dev/sdd
>
> and when I try to list the partitions I get
>
> --------
>
> Disk /dev/sdd: 2032 MB, 2032664576 bytes
> 63 heads, 62 sectors/track, 1016 cylinders
> Units = cylinders of 3906 * 512 = 1999872 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disk identifier: 0x00000000
>
> Device Boot Start End Blocks Id System
> /dev/sdd1 1 3 4096 c W95 FAT32 (LBA)
> Partition 1 has different physical/logical beginnings (non-Linux?):
> phys=(0, 4, 13) logical=(0, 4, 9)
> Partition 1 has different physical/logical endings:
> phys=(17, 2, 30) logical=(2, 10, 16)
> Partition 1 does not end on cylinder boundary.
> /dev/sdd2 3 4 3072 da Non-FS data
> Partition 2 has different physical/logical beginnings (non-Linux?):
> phys=(2, 12, 17) logical=(2, 10, 17)
> Partition 2 has different physical/logical endings:
> phys=(3, 49, 22) logical=(3, 46, 22)
> Partition 2 does not end on cylinder boundary.
> /dev/sdd3 5 6 1536 da Non-FS data
> Partition 3 has different physical/logical beginnings (non-Linux?):
> phys=(16, 12, 25) logical=(4, 16, 25)
> Partition 3 has different physical/logical endings:
> phys=(19, 13, 58) logical=(5, 2, 58)
> Partition 3 does not end on cylinder boundary.
> /dev/sdd4 7 254 482944 83 Linux
> Partition 4 has different physical/logical beginnings (non-Linux?):
> phys=(50, 7, 6) logical=(6, 22, 33)
> Partition 4 has different physical/logical endings:
> phys=(1023, 7, 61) logical=(253, 40, 22)
> Partition 4 does not end on cylinder boundary.
>
> --------
>
> the SD card I'm using here shows up as 64MB larger than the one
> supplied by TS so these warnings don't really surprise me.
>
> What I'm wondering is if I can safely ignore these or better yet is
> there a way to remedy them?
>
> Thanks.
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|