I'm using the 2.4.26 kernel.
Could you tell me where to find ts-7260_kernel_compile_guide.txt? I
could not find it at Technologic or this Group.
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux
http://tech.groups.yahoo.com/group/ts-7000/files/Documentation/
Don
On 12/29/2010 2:29 PM, Jim Jackson wrote:
>
>
>
> On Wed, 29 Dec 2010, Don Tucker wrote:
>
> > Thanks for your help. The image came from Technologic Systems (link in
> > previous post), and I have not done anything to it, so I assumed that
> > bridge.o was from the original image. It would have to be, unless
> > installing bridge-utils ("apt-get install bridge-utils") added that
> > module. I'm not sure how that works. If bridge.o did come from
> > installing bridge-utils, shouldn't the dependencies also have been
> > installed?
>
> Ah You are using the debian image. Sorry I was commented from looking at
> the tslinux image. Which kernel are you using?
>
> > An lsmod shows that the module is not loaded, but that was why I was
> > trying insmod. I looked at the source for the image, but did not see
> any
> > config file. The README mentions doing "make config" wherein the
> various
> > options are selected. Is there a way to see what options were selected
> > in the kernel build?
>
> There is TS documentation ts-7260_kernel_compile_guide.txt
> Good luck - not the clearest document around.
>
> >
> > Don
> > I also checked dmesg, but did not see anything related to bridge.o.
> > On 12/29/2010 2:55 AM, Jim Jackson wrote:
> > >
> > >
> > >
> > > > > /lib/modules/2.4.26-ts11/kernel/net/bridge.o exists, but I
> don't know
> > > > > if that is sufficient. When I attempt to load the module I get
> errors:
> > > > >
> > > > > :net# insmod bridge.o
> > > > > bridge.o: bridge.o: unresolved symbol br_ioctl_hook
> > > > > bridge.o: bridge.o: unresolved symbol br_handle_frame_hook
> > > >
> > > > A kernel module would be named .ko not .o
> > >
> > > This is a 2.4 kernel. It's modules are .o files.
> > >
> > > However just insmod bridge should work if the modules are in the
> correct
> > > place.
> > >
> > > In my ts7260 /lib/modules/2.4.26-ts11/ directory, I do not see any
> > > bridge.o
> > > file.
> > >
> > > > The thing you are trying to insert is probably not the built
> module. It
> > > > could be compiled into the kernel or you have the wrong file.
> > > >
> > > > Try lsmod to see if you have the module loaded. And see if you can
> > > find the config used to build the kernel, if the bridge support is
> > > built in it will be set to CONFIG_BRIDGE=Y or something, as a module
> > > it will be =M
> > > >
> > > > HTH,
> > > >
> > > > Wouter
> > > >
> > >
> > >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|