Thanks for your help. The image came from Technologic Systems (link in
previous post), and I have not done anything to it, so I assumed that
bridge.o was from the original image. It would have to be, unless
installing bridge-utils ("apt-get install bridge-utils") added that
module. I'm not sure how that works. If bridge.o did come from
installing bridge-utils, shouldn't the dependencies also have been
installed?
An lsmod shows that the module is not loaded, but that was why I was
trying insmod. I looked at the source for the image, but did not see any
config file. The README mentions doing "make config" wherein the various
options are selected. Is there a way to see what options were selected
in the kernel build?
Don
I also checked dmesg, but did not see anything related to bridge.o.
On 12/29/2010 2:55 AM, Jim Jackson wrote:
>
>
>
> > > /lib/modules/2.4.26-ts11/kernel/net/bridge.o exists, but I don't know
> > > if that is sufficient. When I attempt to load the module I get errors:
> > >
> > > :net# insmod bridge.o
> > > bridge.o: bridge.o: unresolved symbol br_ioctl_hook
> > > bridge.o: bridge.o: unresolved symbol br_handle_frame_hook
> >
> > A kernel module would be named .ko not .o
>
> This is a 2.4 kernel. It's modules are .o files.
>
> However just insmod bridge should work if the modules are in the correct
> place.
>
> In my ts7260 /lib/modules/2.4.26-ts11/ directory, I do not see any
> bridge.o
> file.
>
> > The thing you are trying to insert is probably not the built module. It
> > could be compiled into the kernel or you have the wrong file.
> >
> > Try lsmod to see if you have the module loaded. And see if you can
> find the config used to build the kernel, if the bridge support is
> built in it will be set to CONFIG_BRIDGE=Y or something, as a module
> it will be =M
> >
> > HTH,
> >
> > Wouter
> >
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|