[ts-7000] ts-7260 4x4 keypad module

To:
Subject:	[ts-7000] ts-7260 4x4 keypad module
From:	Anish Patel <>
Date:	Thu, 16 Dec 2010 20:06:02 -0500

 i am slowly making my way through using my ARM board, and am now trying
to use the keypad.
i have used it in 2.4 with the userland code.  when i try to use the
ts72xx_dio_4x4 keypad, it loads the matrix_keypad module as well.
is this correct?

thanks
anish



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ts-7260 4x4 keypad module, Anish Patel <=

Previous by Date:	[ts-7000] Re: differences between gcc compilers/linkers, FrankP
Next by Date:	[ts-7000] Re: TS7800 PC104 16 bit memory access problem, tommessum
Previous by Thread:	[ts-7000] worksheet, josue.cubero
Next by Thread:	[ts-7000] Fixed TS72XX_DIO_4x4 Driver + cpuserial module [2 Attachments], Anish Patel
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU