The 2.6 kernel for the TS-7260 is unsupported by us, I do not believe the
TS-SER4 would have been tested at all against this, but it should work. If you
are using the kernel from our website, you should have a ts7800_isa16550.ko
module or ts72xx_isa16550.ko module. You will want to use those to get the
ports to show up in the system, you WILL need to take a look at the modinfo for
the module to find the correct parameters you need, IO base, port IO address,
IRQ, etc. Also you will need to follow the same methodology with the TS-7800
of inserting and removing the module multiple times in order to have all 4
ports show up in the system:
http://www.embeddedarm.com/about/resource.php?item=441#chapter10
-Kris Bahnsen
Technologic Systems
--- In "ashwin" <> wrote:
>
> Hi ,
> I am trying to use TS-SER4 with TS 7260 (Linux ts7000 2.6.21-ts kernel)
> when i boot the board i dont see any messages related to TS-SER4 or extra com
> ports. I guess the serial driver isnt getting loaded. or can it be something
> else?
>
> So where should i download the driver from so that my board TS7260 can detect
> TS-SER4?
> I have the tsuart1.o modules loaded. also no ts7260_isa* related modules is
> loaded.
>
> Plz help.
>
> Ashwin Raut.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|