Re: [ts-7000] NFS root hanging [2 Attachments]

[Anish Patel <>]

[Attachment(s) from Anish Patel included below]

I removed the LCD driver and such, i've attached my edited defconfig and recipe
also when i am booting jffs2, i have to use the rootfstype=xxxx option

other things i found strange.
everyone seems to run flash_eraseall -j /dev/mtdblock1, i have to run flash_eraseall -j /dev/mtd1
about the hang - i think that the module is looking for some code in the fgpa, maybe if it doesn't find it in a certain time, it could time out?

so my booting command is actually

fis load zImage <replaced on board vmlinux new zImage>
exec -c "console=ttyAM1,115200 root=/dev/mtdblock1 rootfstype=jffs2"

how does the 4x4 keypad module work?

Thanks


On 12/06/10 12:15, Petr Štetiar wrote:

 

Anish Patel <> [2010-12-06 12:15:53]:

> HI Petr,
> I figured out the problem, I have a TS-7260 without the SD card.
> When the SD card part was compiled in to the kernel, it would cause my
> board to hang. I have removed that from my config and a couple other
> thing and the board seems to be working properly.... I think....

What other things? What's hang? You provide really sparse information...

-- ynezz

Attachment(s) from Anish Patel

2 of 2 File(s)

defconfig

akp-minimal-image.bb

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___