On Thu, 18 Nov 2010, SOMA Sekhar Saraswatula wrote:
>
> hi,
> The issue is resolved after removing defualt route.
> some how getty is popped up for com1 port.
This is a FAQ. Edit the /etc/inittab file to comment out the line that
tells init to start a getty on the line. Then send a HUP signal to init...
kill -1 1
And no getty.
> There by messages are are confused between terminal device and modem
>
> sekhar
>
>
>
> To:
> From:
> Date: Mon, 15 Nov 2010 10:32:08 -0500
> Subject: Re: [ts-7000] Re: PPP issue: not replacing existing default route to
> eth0
>
>
>
>
>
>
> On 11/15/2010 1:46 AM, SOMA Sekhar Saraswatula wrote:
>
>
>
>
> Thanks for reply
>
> 1)I did removed default route to eth0
> 2) defaultroute added in OPTIONS
> 3) replacedefaultroute /* ## This is producing error as not found commnad so
> I din't used this. */
>
> But before running the ppp script in TS7200 I ran the script in Redhat linux.
> Where it is creating PPP0 defualt route and able to connect to internet.
>
> But same script is having issue in creating the route in TS7200.
>
> In TS7200 there are no default IP-UP and IP-down scripts. I copied those
> script from Redhat. Is it the cause of the issues?
> where Can I get IP-UP & IP-DOWN script for TS-7200 (usually linux maintains
> them in /etc/ppp/ folder. In TS7200 I am unable to find IP-UP/IP-DOWN.
>
> #1, RedHat is not Debian, nor is it TS-Linux, you can't just go copying
> scripts from one and tossing them into the other.
> #2, You also can't rely too heavily on "it works in redhat", one of Linux's
> greatest advantages and faults is everyone can do it different. Kernel
> differences, source version differences, compiler differences, all of these
> can play heavily upon if the end product does what you want it to.
>
> So, toss the RedHat scripts, if you're using Debian off SD then read up on
> how they handle ppp, otherwise start reading the pppd manpage. Thankfully
> pppd is fairly easy and takes care of most things itself. As for the issue
> with replacedefaultroute that's probably from you using a older version of
> pppd then the one Jim was talking about.
>
> --
> Jason Stahls
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|