[ts-7000] No signal on TS7800+GSM1

To:
Subject:	[ts-7000] No signal on TS7800+GSM1
From:	"simonlg2011" <>
Date:	Tue, 16 Nov 2010 17:12:34 -0000

Hello all,

I'm working on a project where we use TS7800 + GSM1 (with Wavecom Q64). After a 
bit of tweaking, I got AT command to work. However, "AT+CSQ" command will 
always get result of 99. I have an antenna installed and I'm sure there is 
quite strong signal in the area. I'm new to GSM programming so would like to 
get some help solving this.


Any input appreciated.


Simon



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] No signal on TS7800+GSM1, simonlg2011 <=

Previous by Date:	Re: [ts-7000] [ts 7200] DIO Code, emmanuel_mayssat
Next by Date:	Re: [ts-7000] Re: apt-get problem from TS-7260 Debian SD image, Don Tucker
Previous by Thread:	[ts-7000] TS-7800 green LED woes, craignied
Next by Thread:	[ts-7000] cross-compilation arm toolchain on linux x86_64 missing library, emmanuel_mayssat
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU