Re: [ts-7000] PWM

[Ferrug <>]

Humm, I see.
I'll try here as well, and if I get something I notice.
thanks again.

Fabio

2010/11/12 David Preza H <>

 

That's were Wishbone enters. As far as I know (hope someone with more knowledge could give us some light), TS-7500 FPGA creates a 256*16 bits memory access, which can be used with Linux using the test program ts7500ctl (for example, ts7500ctl --address=0x6A --poke32=0xffff). This will write a 0xffff value in the address 0x6a, which is actually the one FPGA uses to change the output value for pins 36 to 21.

This is exactly what I am trying, to override the functionality of pin 36 to 30, but I haven't tested enough, and the code is still failing (not the PWM code, but the integration with the wishbone).

I have some work to do, but I'll try to test today later, or in the weekend.

Regards,
Enrique

--
"Dê-me uma alavanca e um bom ponto de apoio que moverei o mundo." Archimedes

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___