ts-7000
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: [ts-7000] TS-7260 External Interrupt INTERRUPT EXMAPLE AT USER CODE

from [Diego Silva] [Permanent Link][Original]
To:
Subject: RE: [ts-7000] TS-7260 External Interrupt INTERRUPT EXMAPLE AT USER CODE PROGRAMMING
From: Diego Silva <>
Date: Fri, 12 Nov 2010 07:54:53 -0300


Now that I looked at Juan’s example I found this line:

fd_irq = open("/proc/irq/78/irq", O_RDONLY| O_NONBLOCK, S_IREAD); //IRQ14.

Is “/proc/irq/78/irq” the driver that Morgan asked me about?


--
Att.
Diego Silva


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [ts-7000] Re: without embedded x86, still getting error..., Donal O'Connor
Next by Date:  [ts-7000] Re: connect serial port with other device, ricardogabriel5
Previous by Thread:  [ts-7000] Re: without embedded x86, still getting error..., Donal O'Connor
Next by Thread:  RE: [ts-7000] TS-7260 External Interrupt INTERRUPT EXMAPLE AT USER CODE PROGRAMMING, Jim Jackson
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU