[ts-7000] 2.4.26-ts11 & IPV6

ts-7000

[ts-7000] 2.4.26-ts11 & IPV6

To:	ts 700 <>
Subject:	[ts-7000] 2.4.26-ts11 & IPV6
From:	alper kalkan <>
Date:	Thu, 11 Nov 2010 15:14:44 +0000

Hi

I need make my TS 7260 board work with IPV6.

Is there any guide you can suggest or any idea that will helpful.

kernel : 2.4.26-ts11

I am newbie at linux.

thanks in advance

alper

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] 2.4.26-ts11 & IPV6, alper kalkan <=

Previous by Date:	RE: [ts-7000] Custom FPGA on TS7300 using opencore, Queisser, Andrew
Next by Date:	[ts-7000] Re: TS-7260 + linux 2.6 + redboot, doka
Previous by Thread:	[ts-7000] TS-7260 External Interrupt, Diego
Next by Thread:	[ts-7000] connect serial port with other device, ricardogabriel5
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU