[ts-7000] using multiple TS-ETH2's with the TS-7260

["Rekcut_Nod" <>]

Hello,

I am attempting to use 2 TS-ETH2 PC/104 peripheral boards with the TS-7260 
running the 2.4 version of the TS-Linux kernel.  I've got one board set up and 
working fine.  However, when I attempt to boot with a second TS-ETH2 board in 
the stack, I don't get a boot-up screen or any activity over COM1.  I have the 
jumpers for the first board set with ARM ON and all others OFF.  I have the 
jumpers for the second board set with JP1 ON, JP2 OFF, ARM ON, IRQ5 ON, IRQ6 
OFF, and IRQ7 ON.  Can anyone think of any reason why adding the second board 
would prevent a boot-up?

Thank you in advance for any assistance.

Don



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/