[ts-7000] Execute on power up (TS7550)

To:
Subject:	[ts-7000] Execute on power up (TS7550)
From:	"knabuejr" <>
Date:	Mon, 11 Oct 2010 13:41:49 -0000

I want to set up the serial ports on boot up.  So I edited linuxrc-fastboot and 
added `xuartctl --port=0 --server' at the end of the file.  I then executed `rm 
linuxrc; ln -sf /linuxrc-fastboot /linuxrc; save' to save everything to xnand 
flash.  When I reboot, the xuartctl line does not get executed.  What am I 
doing wrong?

Thanks, Bill




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Execute on power up (TS7550), knabuejr <=

Previous by Date:	[ts-7000] Can?t communicate via ftp or ssh (TS7550/TS752B), knabuejr
Next by Date:	RE: [ts-7000] Re: ts 7300 LCD drÃÂver problem for HD44780, alper kalkan
Previous by Thread:	[ts-7000] Can?t communicate via ftp or ssh (TS7550/TS752B), knabuejr
Next by Thread:	[ts-7000] SPI interface observation, Blair
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU