Our 2.6.34.6-m *almost* boots up over SD card boot now. Try figuring it out
from scratch when you're an idiot'n newbie like me! Never too old for all
nighters!
I'm at the point where I have an SD card remade from
512mbsd-7400-linux2629-lenny-eabi.dd image. I figured out how to re-compile
tssdcard.c for 2.6.34.6-m, but the other three players on partition three are
more elusive:
tsuart7400.ko (I'm on 7260)
tsuart1.ko
ts7400.ko (I'm on 7260)
>From where do these come? I probably missed something obvious. (I can find
>-ish *.c files in the kernel tree, but I cannot compile them as separate
>modules using xconfig.)
And I see that the stock config from Matthieu includes tssdcard built-in to the
kernel, yet linuxrc-sdroot does an insmod of tssdcard ? It seems that
/dev/tssxxx etc. are populated by this insmod, so I need to make tssdcard a
module so that this load can take place?
Oh, is it appropriate to clip the watchdog's ears for 7260 as you all are doing
for 7400?
Thanks!
(Sorrry for the long, frustrated post last Monday. In retrospect, what we were
missing was the 2.6 four partition SD card. Trying to make a 2.4 SD card into
a 2.6 one is a fool's errand, and you'd miss things like linuxrc, and a whole
lot of evident info one can get by studying the layout of
512mbsd-7400-linux2629-lenny-eabi.dd. Like the kernel being in partition 2,
not partition 1.)
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|