Re: [ts-7000] RE:Remote EDGE/3G access via GSM

[Achim Scheidl <>]

Buuuh, it looks like these routers are all very expensive. I also found HUAWEI E970 which looks powerful and a little cheaper... 

But still I prefer a small USB-Stick connecting direct to the board, no cable, no power supply and hopefully (that is the question!) no drivers.

Achim

On Fri, Sep 17, 2010 at 08:51, <> wrote:

 

Hi oggygh3d,

I'm on the way for an application using GSM/GPRS. More industrial oriented, low bandwidth required.

I'm focused on these modems from TELIT

http://www.telit.com/module/infopool/download.php?id=168

http://www.telit.com/module/infopool/download.php?id=167

Serial communication, AT commands.... "EASY GPRS"

Communication can be implemented like this :

Openning socket

AT#SD = 2 , 0 , 80 , “www.google.com”
CONNECT

Working with it
(data sending / receiving)

Espace sequence

(+++)
OK

Closing socket
AT#SH = 2
OK

Or you can use PPP with LCP Exchange

Alexandre

-- 
SCH.E.I.D.L
Neue Steuerungen für regeneratives Heizen


Von Soden Str 46a
90475 Nürnberg
Tel: 0911 9881032
Fax: 0180 3551898810

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___