I have the TS-7550 and have just disk dumped the June 2010 software update onto
the flash:
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7500-linux/binaries/ts-images/2gbsd-eclipse-jun012010.dd.bz2
I have a Logitech webcam that I'd like to use with the board, but I do NOT have
the TS-ENC750 enclosure so I will not be able to Lazarus my Kernel if I brick
my board.
With this in mind, how do I gain USB webcam support? I got the UVC source from
http://www.ideasonboard.org/uvc/ which used to be linux-uvc.berlios.de/. I
thought it would be as easy as moving the source onto the board and typing
'make', but alas, the source is too large and won't fit onto the board.
The idea of building kernel modules is pretty new and scary to me. Can anyone
help me?
As a side note, after I disk dumped the update image described above, the
following happens when I try to call a TS-specific utility:
ts7500:~# ts7500ctl --help
ts7500ctl: can't load library 'libc.so.0'
What is that about?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|