| To: | |
|---|---|
| Subject: | Re: [ts-7000] How to set the ADC option on ts-7200 |
| From: | Jason Stahls <> |
| Date: | Tue, 20 Jul 2010 21:46:00 -0400 |
On 7/20/2010 8:55 PM, mailorder_va wrote:
> Hello
>
> I bought a ts-7200 but forgot to add the ADC option. I got hold of a MAX197
> chip. How do I set the ADC option on the board?
You can't without sending the board back to TS, the FPGA load is
different between boards with ADC and those without.
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] How to set the ADC option on ts-7200, mailorder_va |
|---|---|
| Next by Date: | [ts-7000] ts-7800 + ts-7kv + ts-dio64, sywatec |
| Previous by Thread: | [ts-7000] How to set the ADC option on ts-7200, mailorder_va |
| Next by Thread: | [ts-7000] Re: How to set the ADC option on ts-7200, j.chitte |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU