[ts-7000] Re: can not execute binary file

["Doug" <>]

Hi Xiang,

You're using an EABI toolchain, but default TS linux distributions are OABI. 
Try using the OABI toolchain:

ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7800-linux/cross-toolchains/ts7800-crosstool-linux-oldabi-0.28rc39.tar.bz2

See:
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7800-linux/cross-toolchains/README.EABIvsOABI

for more information.

--- In  Xiang Lu <> wrote:
>
> Yes, I used the cross compile tool chain called as "arm-none-linux-gnueabi".



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/