ts-7000
[Top] [All Lists]

Re: [ts-7000] USB connection

To:
Subject: Re: [ts-7000] USB connection
From: Yuttanant Suwansiri <>
Date: Mon, 12 Jul 2010 13:38:11 -0700 (PDT)



Ricardo,

   Thank you for the correction.

Arm
--- On Fri, 7/9/10, Ricardo SifÃn <> wrote:

From: Ricardo SifÃn <>
Subject: Re: [ts-7000] USB connection
To:
Date: Friday, July 9, 2010, 9:38 PM

 

Hi,
 
As I observe in the picture, you have an error:

There must be a space between part1 and /mnt /cf

mount -t vfat /dev/scsi/hos0/ bus0/target0/ lun0/part1   /mnt/cf
 
Ricardo

2010/7/8 Yuttanant Suwansiri <m("yahoo.com","ysuwansiri");" target="_blank" href="/mc/compose?to="> com>
 
[Attachment(s) from Yuttanant Suwansiri included below]

Hi Ricardo,

   I tried that but still had no luck:(  (See the attached file)

Arm

--- On Wed, 7/7/10, Ricardo SifÃn <m("gmail.com","ricardosifon");" target="_blank" href="/mc/compose?to=">ricardosifon@ gmail.com> wrote:

From: Ricardo SifÃn <m("gmail.com","ricardosifon");" target="_blank" href="/mc/compose?to=">ricardosifon@ gmail.com>
Subject: Re: [ts-7000] USB connection
To: m("yahoogroups.com","ts-7000");" target="_blank" href="/mc/compose?to="> .com
Date: Wednesday, July 7, 2010, 7:03 PM

 

Hi,
 
You have to mount the pendrive. You can do this with the following command (1):
 

mount -t vfat /dev/scsi/hos0/ bus0/target0/ lun0/part1 /mnt/cf

 
Where "cf" is the folder where you will mount the pendrive.
As you create it before installing the pendrive.
 
mkdir /mnt/cf

Then you can access the pendrive contents of a folder like most of the system.

If you want to mount the flash drive every time you turn the board TS, you should add the line (1) in the file: rcS.sysinit located wihtin /etc/rc.d
 
Best Regards,
 
Ricardo SifÃn
 
 
 
 

Hi,

I have TS-7200.

I ran the command /usr/bin/loadUSBMod ules.sh, but couldn't get the USB connection to work.

How can I get the USB connection to work?

Thank you,

Arm







__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU