[ts-7000] Read from COM B TS-7553

To:
Subject:	[ts-7000] Read from COM B TS-7553
From:	"Fran" <>
Date:	Wed, 30 Jun 2010 10:24:19 -0000

Hi All,

I'm using a DB9 cable with 2 RS-232, and I can read from port COM A, but I 
can't read from port COM B.

In other posts I have seen that I must comment one line on /etc/inittab: 
#lgn:12345:respawn:/sbin/getty -L 115200 ttyAM1
but on my inittab I dont't have this, I have:

# Example how to put a getty on a serial line (for a terminal)
#
T0:23:respawn:/sbin/getty -L ttyS0 115200 vt100
#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100

I have comented the line: T0:23... and restarted, but don't solve the problem.
Does anyone have any ideas?
Thanks



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Read from COM B TS-7553, Fran <=

Previous by Date:	[ts-7000] Re: ts-7500 install new kernel to SD card, alexeyvdovin
Next by Date:	[ts-7000] ts7500 booting, praveenkumar n
Previous by Thread:	[ts-7000] fastest way to log data to hardrive, smee204@ymail.com
Next by Thread:	[ts-7000] ts7500 booting, praveenkumar n
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU