On Tue, 8 Jun 2010, mario.huizar wrote:
> Hello everyone,
>
> I want to use the serial port COM1 for a communication protocol. I dont want
> it to be a console output.
> I already removed the JP2 to disable the console output, but whenever I make
> a connection to this port with my PC via cutecom for example I still get via
> serial port the console output from my TS-7300. i.e. I see the
> "login:"
This is an FAQ. Look in the file /etc/inittab for a line like...
lgn0:12345:respawn:/sbin/getty -L 115200 ttyAM0
init has started getty on the line. Connect it out thus
#lgn0:12345:respawn:/sbin/getty -L 115200 ttyAM0
and then do
# init -1 1
to tell init to reread the inittab file.
> The only thing that happens when I removed the JP2 is that I dont see all the
> initialization process on the COM1 but on the VGA, as is suppose to be. But
> at the end of the initialization I see also the
> login:
> at my COM1.
> I want to truly disable any output that goes through COM1. How can this be
> done?
>
> Regards!
> Mario Huizar
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|