[ts-7000] Disabling COM1 console output on TS-7300

["mario.huizar" <>]

Hello everyone,

I want to use the serial port COM1 for a communication protocol. I dont want it 
to be a console output.
I already removed the JP2 to disable the console output, but whenever I make a 
connection to this port with my PC via cutecom for example I still get via 
serial port the console output from my TS-7300. i.e. I see the 
"login:"
The only thing that happens when I removed the JP2 is that I dont see all the 
initialization process on the COM1 but on the VGA, as is suppose to be. But at 
the end of the initialization I see also the 
login: 
at my COM1.
I want to truly disable any output that goes through COM1. How can this be done?

Regards!
Mario Huizar



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/