I set to etch the source repository and update gcc and others to work with
kernel 2.6(sdimage.dd have 2.4 kernel).
My C program work fine with kernel 2.4, but I need to install extra software to
set my web server, becouse that I update. At the beginning I donwload
ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7400-linux/binaries/ts-images/512mbsd-7400-linux26-etch-oabi.dd.bz2,
but not work in my 1GB SD Card.
--- In tom campbell <> wrote:
>
> On Mon, 2010-05-31 at 16:46 -0400, Jason Stahls wrote:
> >
> > Luis wrote:
> > > Am try to install software on board ts-7400, but when I do that
> > agt-get say to me that a have to remove g++3.3 and others packages.
> > > The default source.list have ftp://ftp.us.debian.com/stable main
> > non-free.
> > > What repository I set to install the correct software?
> > > My board have this image installed
> > ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7400-linux/binaries/ts-images/sdimage.dd.bz2
> > kernel 2.4
> >
> > Debian has a _really_ bad trend of moving the repos... Look back
> > through the archives for the new links, or google it. I belive the
> > image you have is based on Debian "sarge"
> >
> > Jason Stahls
> >
>
> If it's sarge, here's the /etc/apt/source.list I use:
> deb http://archive.debian.org/debian sarge main contrib
>
> as I recall, it was a pain to figure out
> tc
>
>
>
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|