[ts-7000] Re: my rs-485 doesn't work on TS 7800

["kristechnologic" <>]

If you have the two ICs located at U17 and U18 (between the AVR and Lattice 
PLD) then you have this option installed.

-Kris Bahnsen
Technologic Systems

--- In  "rodriguezromain62" <> 
wrote:
>
> Ok, I need to know if I have the OP-485-FD-14 option on my Board.
> How know that ?? thanks
> 
> --- In  "rodriguezromain62" <rodriguezromain62@> 
> wrote:
> >
> > I forget some details, sorry :
> > 
> > I open /dev/ttts2 and /dev/ttts3 for pin 6/1 and 4/9.
> > 
> > I think I send data correctly, but I dont receive any response.
> > what is the problem, I need help !! Thanks !
> > 
> > I could send you the source code if you need it for help me.
> >
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/