[ts-7000] my rs-485 doesn't work on TS 7800

["rodriguezromain62" <>]

Hello everybody, I have a problem with the rs-485, I try to use it but I dont 
have any response :/

I know it is necessary to clear bit 15 of register 0xE800000C to enable rs-485, 
I did it.
I try to use pin 1(+) and 6(-) or 4(+) and 9(-).

I have a PT100 temp-sensor on my rs-485. When I send a command like "TAI", the 
pt100 would say "*A+023.49 C\r" but it isn't ... 

My temp-sensor is OK, no problem on it. I checked the driver for rs-485
(the file is tsuart7800.ko if I remember) I have this file on my TS.

I dont understand why it doesn't work :'( and I need this working.

Thanks for Help.

Romain, Student on training.



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/