Hi Balaji,
What is your vmlinux size ? I suppose it should be less than 2mb because
otherwise it doesn't boot perhaps because it takes more space after
uncompressing than is available. Secondly check that you have setup your root
filesystem properly ? I used compact flash partitioned into a boot
partition(mkfs.ext2 -I 128 /dev/sda1) and the rest for root file system
(mkfs.ext3 /dev/sda2). What is your filesystem on CF.
Regards,
Jamil Haider
--- In Balaji Ravindran <> wrote:
>
> Hi Jamil,
>
> Weird, i tried your config file. It compiled successfully. No errors. I
> copied the vmlinux in arch...arm....boot..compressed and tftp copied it to my
> TS7200, and executed it. It did uncompressing linux, and did not proceed any
> further. No error nothing. What could be the problem? Has anyone encountered
> this before?
>
> Raw file loaded 0x00218000-0x00406307, assumed entry at 0x00218000
> RedBoot> exec -c "console=ttyAM0,115200 root=/dev/hda1"
> Using base address 0x00218000 and length 0x001ee308
> Uncompressing
> Linux................................................................................................
>
> Thanks
>
> Balaji R
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|