Iam using TS-7800, and ISA mode is ON.
The output channel works, I can Turn ON/OFF a led but I don't know how
input-channel works.
any experience with this input-device?
--- In Frank <> wrote:
>
> Which SBC are you using? Some boards (e.g. TS-7800) need you to turn on
> ISA mode first.
>
> -Frank
>
> On 4/23/2010 5:05 PM, cstangei wrote:
> >
> > Hi guys,
> >
> > I have some problem with this device. The output works but input not.
> > I think I'am doing somthing wrong.
> > This is my situation:
> > 24V to pin1,
> > Ground to pin 34
> > On power, read:
> > peekpoke 32 0xEE000128
> > 0xFFFFFFFF
> > Off power, read:
> > peekpoke 32 0xEE000128
> > 0xFFFFFFFF
> >
> > why 0xFF?
> > any help,suggestion?
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|