| To: | |
|---|---|
| Subject: | [ts-7000] TS7350 with ZIGBEE C library |
| From: | "ubits7350" <> |
| Date: | Sun, 25 Apr 2010 14:01:30 -0000 |
I have configured zigbee with ts7350 board and I have seen the device as
/dev/ttts0
I have 2 questions.
How can I send and receive data in C using ZIGBEE RF ?
How can I test connection between zigbee modules ? (echo did not work)
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Kernel 2.6.29.1 stops booting after printing INIT:, jamil_fawad |
|---|---|
| Next by Date: | Re: [ts-7000] TS7350 with ZIGBEE C library, Joe Mari Maja |
| Previous by Thread: | [ts-7000] Kernel 2.6.29.1 stops booting after printing INIT:, jamil_fawad |
| Next by Thread: | Re: [ts-7000] TS7350 with ZIGBEE C library, Joe Mari Maja |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU